Cisco 7941G Administration Manual page 142
For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs
Also See for 7941G:
- Administration manual (302 pages) ,
- User manual (132 pages) ,
- Phone manual (92 pages)
Table of Contents
Advertisement
Telephony Features Available for Cisco Unified IP Phone
Feature
Auto Answer
Auto Dial
Auto Pickup
Automatic Port
Synchronization
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco
Unified Communications Manager 9.0 (SCCP and SIP)
122
Description
Connects incoming calls automatically after a ring or two.
Auto Answer works with either the speakerphone or the
headset.
Allows the phone user to choose from matching numbers
in the Placed Calls log while dialing. To place the call, the
user chooses a number from the Auto Dial list or continue
to enter digits manually.
Allows a user to use one-touch pickup functionality for
call pickup features.
When the Cisco Unified CM administrator uses the Remote
Port Configuration feature to set the speed and duplex
function of an IP Phone remotely, loss of packets can occur
if one port is slower than the other.
The Automatic Port Synchronization feature synchronizes
the ports to the lowest speed among the two ports, which
eliminates packet loss. When Automatic Port
Synchronization is enabled, Cisco recommends that both
ports be configured for autonegotiate. If one port is enabled
for autonegotiate and the other is at a fixed speed, the
phone synchronizes to the fixed port speed.
If both the ports are configured for fixed speed,
Note
the Automatic Port Synchronization feature is
ineffective.
The Remote Port Configuration and Automatic
Note
Port Synchronization features are compatible only
with IEEE 802.3AF Power of Ethernet (PoE)
switches. Switches that support only Cisco Inline
Power are not compatible. Enabling this feature
on phones that are connected to these types of
switches could result in loss of connectivity to
Cisco Unified CM, if the phone is powered by
PoE.
Features, Templates, Services, and Users
Configuration reference
For more information, see Cisco Unified
Communications Manager Administration
Guide, "Directory Number Configuration"
chapter.
No configuration required.
For more information, see Cisco Unified
Communications Manager Features and
Services Guide, "Call Pickup" chapter.
To configure the parameter in the Cisco
Unified CM Administration application,
choose Device > Phone, select the
appropriate IP Phones, and scroll to the
Product Specific Configuration
Layout pane.
To configure the setting on multiple phones
simultaneously, enable Automatic Port
Synchronization in the Enterprise Phone
Configuration (System > Enterprise Phone
Configuration).
- Quick Links:
- Cisco Unified Ip Phone 7942G
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
