Table of Contents
Advertisement
DLP- D425 Create a New or Cloned Alarm Severity Profile
node that contains the card. (If you are creating profiles, you can apply these separately at the network
level or at the card level. To do this, refer to the
task on page
Modify (customize) the new alarm profile:
Step 10
a.
In the new alarm profile column, double-click the alarm severity you want to change in the custom
profile.
Choose a severity from the drop-down list.
b.
Repeat Steps
c.
when you view the alarms or conditions after making modifications:
•
•
•
Step 11
After you have customized the new alarm profile, right-click the profile column to highlight it.
Step 12
Click Store.
Step 13
If you want to save the profile to a node:
In the Store Profile(s) dialog box, click To Node(s)
a.
Figure 21-3
If you want to save the profile to only one node, click the node in the Node Names list.
b.
c.
If you want to save the profile to all nodes, click Select All.
d.
If you do not want to save the profile to any nodes, click Select None.
e.
If you want to update alarm profile information, click (Synchronize).
If you want to save the profile to a file:
Step 14
In the Store Profile(s) dialog box
a.
Click Browse and navigate to the profile save location.
b.
Enter a name in the File name field.
c.
Cisco ONS 15454 SDH Procedure Guide, R7.0
21-8
18-18.)
10a
and
10b
for each severity you want to customize. Refer to the following guidelines
All CR or MJ default or user-defined severity settings are demoted to MN in NSA situations.
Default severities are used for all alarms and conditions until you create and apply a new profile.
Changing a severity to inherited (I) or unset (U) does not change the severity of the alarm.
Store Profile(s) Dialog Box
"DLP-D117 Apply Alarm Profiles to Cards and Nodes"
(Figure
(Figure
21-3), click To File.
Chapter 21
DLPs D400 to D499
21-3).
78-17194-01
Advertisement
Chapters
Table of Contents
