No Ip Dhcp Relay Common-Agent-Address-Interface; Service Dhcp-Relay - Siemens SCALANCE XC-200 Configuration Manual
Simatic net command line interface industrial ethernet switches
Hide thumbs
Also See for SCALANCE XC-200:
- Configuration manual (270 pages) ,
- Operating instructions manual (84 pages) ,
- Set up and configuration (64 pages)
Table of Contents
Advertisement
Network protocols
7.4 DHCP Relay
Further notes
You reset the common agent address to the default value with the no ip dhcp relay
common-agent-address-interface command.
You enable the use of a common agent address with the ip dhcp relay common-agent-
address command.
You disable the use of a common agent address with the no ip dhcp relay common-
agent-address command.
7.4.2.9
no ip dhcp relay common-agent-address-interface
Description
With this command you reset the common agent address to the default value.
Requirement
You are in the Global configuration mode.
The command prompt is:
cli(config)#
Syntax
Call the command without parameter assignment:
no ip dhcp relay common-agent-address-interface
Result
The default value for the common agent address is used.
Further notes
You define a common agent address with the ip dhcp relay common-agent-address-
interface command.
You enable the use of a common agent address with the ip dhcp relay common-agent-
address command.
You disable the use of a common agent address with the no ip dhcp relay common-
agent-address command.
7.4.2.10
service dhcp-relay
Description
With this command, you enable the DHCP relay agent on the device. The DHCP relay agent
forwards DHCP queries to DHCP servers located in a different subnet.
316
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06
Hide quick links:
Advertisement
Table of Contents
