Spanning-Tree Restricted-Tcn; No Spanning-Tree Restricted-Tcn - Siemens SCALANCE XC-200 Configuration Manual

Simatic net command line interface industrial ethernet switches

Hide thumbs Also See for SCALANCE XC-200:

Table of Contents

Network structures

6.3 Spanning Tree

no spanning-tree restricted-role

The port is released for the role of root port.

Further notes

You prevent the port adopting the role of the root port with the spanning-tree

restricted-role command.

spanning-tree restricted-tcn

With this command, you restrict the port for the Topology Change Notification (TCN) function.

The port cannot initiate any modifications to the network topology.

You are in the Interface configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

Call the command without parameters:

spanning-tree restricted-tcn

The port is prevented from using the TCN function.

Further notes

You cancel the lock with the no spanning-tree restricted-tcn command.

You can display the status of this function and other information with the show spanning-

tree detailcommand.

With this command, you release the port for the TCN function.

SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface

Configuration Manual, 07/2017, C79000-G8976-C361-06

Show Quick Links

Table of Contents