Spanning-Tree Bpdu-Transmit - Siemens SCALANCE XC-200 Configuration Manual

Simatic net command line interface industrial ethernet switches

Hide thumbs Also See for SCALANCE XC-200:

Table of Contents

Network structures

6.3 Spanning Tree

The automatic discovery of a bridge on the interface is disabled.

Further notes

The automatic discovery of a bridge on the interface is enabled with the spanning-tree

auto-edge command.

spanning-tree bpdu-transmit

With this command, you enable or disable the BPDU transmit status at the port.

You are in the Interface Configuration mode.

The command prompt is as follows:

cli(config-if-$$$)#

Call up the command with the following parameters:

spanning-tree bpdu-transmit{enabled|disabled}

The parameters have the following meaning:

The BPDU transmit status has switched over.

Further notes

You can display the status of this function and other information with the show spanning-

tree interface command with the detail option.

BPDU packets are transmitted at the

BPDU packets are not transmitted at

SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface

Range of values / note

Default: enabled

Configuration Manual, 07/2017, C79000-G8976-C361-06

Show Quick Links

Table of Contents