Cisco ASR 9000 Series Command Reference Manual page 929
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages) ,
- Configuration manuallines (694 pages)
Table of Contents
Advertisement
SONET Controller Commands on the Cisco ASR 9000 Series Router
Field
AIS
RDI
FEBE
LOP
NEWPTR
PSE
NSE
PLM
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,
show controllers sonet
Description
Alarm indication signal.
• Line alarm indication signal is sent by the STE1
to alert the downstream LTE2 that a LOS or
LOF defect has been detected on the incoming
SONET section.
• Path alarm indication signal is sent by the LTE
to alert the downstream PTE3 that it has
detected a defect on its incoming line signal.
Remote defect indication.
• Line remote defect indication is reported by the
downstream LTE when it detects LOF4, LOS5,
or AIS6.
• Path remote defect indication is reported by the
downstream PTE when it detects a defect on the
incoming signal.
Far-end block errors.
• Line far-end block error (accumulated from the
M0 or M1 byte) is reported when the
downstream LTE detects BIP7 (B2) errors.
• Path far-end block error (accumulated from the
G1 byte) is reported when the downstream PTE
detects BIP (B3) errors.
Path loss of pointer is reported as a result of an invalid
pointer (H1, H2) or an excess number of NDF8
enabled indications.
Inexact count of the number of times the SONET
framer has validated a new SONET pointer value
(H1, H2).
Inexact count of the number of times the SONET
framer has detected a positive stuff event in the
received pointer (H1, H2).
Inexact count of the number of times the SONET
framer has detected a negative stuff event in the
received pointer (H1, H2).
Payload label mismatch. A different payload-specific
functionality than the provisioned functionality is
reported. For example, 02 to E0, or FD to FE.
Release 5.3.x
909
Hide quick links:
Advertisement
Table of Contents
