Refresh Rtp - Cisco ASR 9000 Series Command Reference Manual

Aggregation services router

Hide thumbs Also See for ASR 9000 Series:

Table of Contents

Serial Interface Commands on the Cisco ASR 9000 Series Router

refresh rtp

To enable the configured context refresh settings for RTP packets, use the refresh rtp command in IPHC

profile configuration mode. To disable context refresh settings for RTP packets, use the no form of this

no refresh rtp

Syntax Description

This command has no keywords or arguments.

Command Default

By default, refresh RTP is disabled and only the first packet in the flow is sent as a 'full-header' packet.

Command Modes

IPHC profile configuration

Command History

Release 4.0.0

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes appropriate task

IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator

for assistance.

The following example shows how to enable the configured refresh settings for RTP packets:

RP/0/RSP0/CPU0:router(config)# config

RP/0/RSP0/CPU0:router(config)# iphc profile Profile_1 type iphc

RP/0/RSP0/CPU0:router(config-iphc-profile)# refresh rtp

Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference,

Modification

This command was introduced.

Release 5.3.x

Show Quick Links

Table of Contents