Debug Bridge-Domain - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
debug bridge-domain
debug bridge-domain
To enable debugging of bridge domains, use the debug bridge-domain command in privileged EXEC
mode. To disable debugging, use the no form of this command.
Syntax Description
number
mac security
mac table
errors
events
configuration
errors
ipc
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
The undebug bridge-domain command is the same as the no debug bridge-domain command.
Related Commands
Command
show debugging
Cisco ME 3800X and ME 3600X Switch Command Reference
B-2
debug bridge-domain {number mac {security | table} {errors | events} | configuration | errors |
ipc}
no debug bridge-domain {number mac {security | table} {errors | events} | configuration |
errors | ipc}
Enter the bridge domain number to debug. The range is 1 to 8000.
Displays MAC security debug messages.
Displays MAC address table debug messages.
Displays MAC security or MAC address table error debug messages.
Displays MAC security or MAC address table event debug messages.
Displays bridge domain configuration event debug messages.
Displays bridge domain error debug messages.
Displays bridge domain IPC error and event debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B
Cisco ME 3800X and ME 3600X Switch Debug Commands
OL-28238-01
Advertisement
Table of Contents
