Show Ip Igmp Snooping Groups - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Chapter
show ip igmp snooping groups
To display the Internet Group Management Protocol (IGMP) snooping multicast table or multicast
information for the switch, use the show ip igmp snooping groups command in privileged EXEC
command. To display the multicast table for a specified multicast VLAN or to diplay specific multicast
information, use with the vlan keyword.
Syntax Description
count
ip_address
vlan-id
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(52)EY
Usage Guidelines
Use this command to display multicast information or the multicast table.
VLAN IDs 1002 to 1005 are reserved for Token Ring and FDDI VLANs and cannot be used in IGMP
snooping.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-28238-01
show ip igmp snooping groups [count] [ | {begin | exclude | include} expression]
show ip igmp snooping groups vlan vlan-id [ip_address | count] [ | {begin | exclude | include}
expression]
(Optional) Displays the total number of entries for the specified command
options instead of the actual entries.
(Optional) Displays characteristics of the multicast group with the specified group
IP address.
(Optional) Specifies a VLAN; the range is 1 to 1001 and 1006 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Cisco ME 3800X and ME 3600X Switch Command Reference
show ip igmp snooping groups
-83
Advertisement
Table of Contents
