Cisco ME 3800X Command Reference Manual page 283

Hide thumbs Also See for ME 3800X:

Table of Contents

This example shows how to apply plcmap1 as an output policy map to a port:

Switch(config)# interface gigabitethernet0/1

Switch(config-if)# service-policy output plcmap1

This example shows how to remove plcmap2 from a port:

Switch(config)# interface gigabitethernet0/2

Switch(config-if)# no service-policy output plcmap2

This example shows how to apply plcmap1 as an output policy map to a service instance:

Switch (config)# interface gigabitethernet0/2

Switch (config-if)# service instance 1 Ethernet

Switch (config-if-srv)# service-policy output plcmap1

Related Commands

show policy-map

interface [interface-id]

show running-config

service-policy (interface and service-instance configuration modes)

Creates or modifies a policy map that can be attached to multiple ports to

specify a service policy.

Displays quality of service (QoS) policy maps.

Displays policy maps configured on the specified interface or on all

Displays the operating configuration.

Cisco ME 3800X and ME 3600X Switch Command Reference