Cisco ME 3800X Command Reference Manual page 252

Hide thumbs Also See for ME 3800X:

Table of Contents

random-detect cos

In the following example, WRED has been enabled using the random-detect cos command. With the

random-detect cos command, the CoS value has been specified, along with the minimum and maximum

thresholds, and the maximum probability denominator.

Switch> enable

Switch# configure terminal

Switch(config)# policy-map policymap1

Switch(config-pmap)# class class1

Switch(config-pmap-c)# random-detect cos 1 12 25 1/10

Switch(config-pmap-c)# end

Related Commands

random-detect

Cisco ME 3800X and ME 3600X Switch Command Reference

Enables WRED on the basis of the CoS value of a packet.

Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands