Match (Access-Map Configuration) - Cisco ME 3800X Command Reference Manual
Hide thumbs
Also See for ME 3800X:
- Installation manual (80 pages) ,
- Software manual (956 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
Chapter 2
Cisco ME 3800X and ME 3600X Switch Cisco IOS Commands
match (access-map configuration)
To match packets against one or more access lists, use the match command in access-map configuration
command mode to set the VLAN map. To remove the match parameters, use the no form of this
command.
Syntax Description
ip address
mac address
name
number
Defaults
The default action is to have no match parameters applied to a VLAN map.
Command Modes
Access-map configuration
Command History
Release
12.2(52)EY
Usage Guidelines
You enter access-map configuration mode by using the
You must enter one access list name or number; others are optional. You can match packets against one
or more access lists. Matching any of the lists counts as a match of the entry.
In access-map configuration mode, use the match command to define the match conditions for a VLAN
map applied to a VLAN. Use the action command to set the action that occurs when the packet matches
the conditions.
Packets are matched only against access lists of the same protocol type; IP packets are matched against
IP access lists, and all other packets are matched against MAC access lists.
Both IP and MAC addresses can be specified for the same map entry.
You can verify the configuration by entering the show vlan access-map privileged EXEC command.
OL-28238-01
match {ip address {name | number} [name | number] [name | number]...} | {mac address {name}
[name] [name]...}
no match {ip address {name | number} [name | number] [name | number]...} | {mac address
{name} [name] [name]...}
Sets the access map to match packets against an IP address access list.
Sets the access map to match packets against a MAC address access list.
Name of the access list to match packets against.
Number of the access list to match packets against. This option is not valid for MAC
access lists.
Modification
This command was introduced.
vlan access-map
Cisco ME 3800X and ME 3600X Switch Command Reference
match (access-map configuration)
global configuration command.
2-165
Advertisement
Table of Contents
