Cisco 7941G Administration Manual page 87
For cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs
Also See for 7941G:
- Administration manual (302 pages) ,
- User manual (132 pages) ,
- Phone manual (92 pages)
Table of Contents
Advertisement
Cisco Unified IP Phone Settings
Option
PC VLAN
VPN
The following table describes the IPv4 configuration menu options.
Table 10: IPv4 Configuration Menu Options
Option
DHCP
IP Address
Subnet Mask
Default Router 1
Default Router 2
Default Router 3
Default Router 4
Default Router 5
Description
Allows the phone to interoperate with
third-party switches that do not support a voice
VLAN. The Admin VLAN ID option must be
set before you can change this option.
Shows the virtual private network (VPN) Client
state:
• Connected
• Not Connected
(Supported only for the Cisco Unified IP Phone
7942G, and 7962G.)
Description
Indicates whether the phone has DHCP
enabled or disabled.
When DHCP is enabled, the DHCP server
assigns the phone anIPv4 address. When
DHCP is disabled, you manually assign
an IPv4 address to the phone.
Internet Protocol version 4 (IPv4) address
of the phone.
If you assign an IPv4 address with this
option, you must also assign a subnet
mask and default router. See Subnet Mask
and Default Router 1 options in this table.
Subnet mask used by the phone.
Default router used by the phone (Default
Router 1) and optional backup routers
(Default Router 2–5).
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962G Administration Guide for Cisco Unified
Network Configuration Menu
To Change
Set PC VLAN Field, on page 77
Display only—Cannot configure.
To Change
Set DHCP Field, on page 77
Set IP Address Field, on page 77
Set Subnet Mask Field, on page 78
Set Default Router Fields, on page 78
Communications Manager 9.0 (SCCP and SIP)
67
- Quick Links:
- Cisco Unified Ip Phone 7942G
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
