Configuring Ipv6; Configuring Ipv6 Wan Settings; Setting The Ip Mode; Configuring Dhcpv6 - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring IPv6
Configuring IPv6
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
Cisco CVR100W Wireless-N 300M Router Administration Guide
Configuring IPv6 WAN Settings
Configuring WAN properties for an IPv6 network depends on the type of internet
connection that you have. You can configure the CVR100W to be a DHCPv6 client
of the ISP for this WAN or to use a static IPv6 address provided by the ISP.
Setting the IP Mode
To configure IPv6 WAN settings on your CVR100W, you must first set the IP mode
to LAN:IPv6, WAN:IPv6 or LAN:IPv4+IPv6, WAN:IPv4+IPv6.
See
Configuring IP Mode
Configuring DHCPv6
If your ISP provides you with a dynamically assigned address, configure the
CVR100W to use be a DHCPv6 client.
To configure the CVR100W to be a DHCPv6 client:
Choose Networking > IPv6 Configuration > IPv6 WAN Configuration.
In the WAN Connection Type field, click the Automatic Configuration-DHCPv6
radio button.
Click Save.
Configuring a Static IP Address
If your ISP assigns you a fixed address to access the Internet, configure the
CVR100W to use a static IPv6 address.
To configure the CVR100W to use a static IPv6 address:
Choose Networking > IPv6 Configuration > IPv6 WAN Configuration.
In the WAN Connection Type field, click the Static IPv6 radio button.
In the Static IP Address area, enter the following information:
for more information.
2
40
Advertisement
Table of Contents
