hit counter script

Wall Mounting; Connecting The Cvr100W - Cisco CVR100W Administration Manual

Wireless-n 300m router
Hide thumbs Also See for CVR100W:
Table of Contents

Advertisement

Introduction

Connecting the CVR100W

WARNING
Connecting the CVR100W
STEP 1
STEP 2
!
CAUTION
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide

Wall Mounting

The CVR100W can be wall-mounted. The wall-mounting hardware is
user-supplied. The ports on the back panel of the CVR100W must face either
upward or downward when mounting the CVR100W to a wall.
Insecure mounting might damage the device or cause injury. Cisco is not
responsible for damages incurred by insecure wall-mounting.
By default, the wireless module of the CVR100W is enabled. For the initial
configuration, we recommend that you connect to the CVR100W with an Ethernet
cable. Of course, you can also use a wireless connection. To connect the PC to
your wireless network for the first time, use the default SSID name and pre-shared
key of the CVR100W's wireless access point that are provided on the product
label at the bottom of the CVR100W. See
for more information.
Power off all equipment, including the cable or DSL modem, the PC you will use to
connect to the CVR100W, and the CVR100W itself.
Connect the supplied power adapter to the 12VDC port on the back panel of the
CVR100W. Plug the other end of the power adapter into an electrical outlet. Make
sure that the POWER button is turned off.
Use only the power adapter that is supplied with the unit. Using a different power
adapter could damage the unit.
Connection one end of an Ethernet cable to your cable or DSL modem. Connect
the other end to the WAN port on the back panel.
Connect one end of a different Ethernet cable to one of the LAN ports on the back
of the CVR100W. Connect the other end to an Ethernet port on the PC that you will
use to run the web-based Device Manager.
Connecting to Your Wireless Network
1
14

Advertisement

Table of Contents
loading

Table of Contents