Configuring Port Range Forwarding - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Firewall
Configuring Port Range Forwarding
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Configuring Port Range Forwarding
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
STEP 8
Cisco CVR100W Wireless-N 300M Router Administration Guide
In the External Port field, enter the port number that triggers this rule when a
connection request from outgoing traffic is made.
In the Internal Port field, enter the port number used by the remote system to
respond to the request it receives.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP &
UDP).
In the IP Address field, enter the IP address.
In the Enable field, check the box to enable the rule.
Click Save.
To add a port range forwarding rule:
Choose Firewall > Port Range Forwarding.
In the Service Name field, enter the name of the service to configure port
forwarding.
In the Start Port field, specify the port number that begins the range of ports to
forward.
In the End Port field, specify the port number that ends the range of ports to
forward.
From the Protocol drop-down menu, choose a protocol (TCP, UDP, or TCP &
UDP).
In the IP Address field, enter the IP address.
In the Enable field, check the box to enable the rule.
Click Save.
4
79
Advertisement
Table of Contents
