Configuring Basic Wireless Settings - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Wireless Network
Configuring Basic Wireless Settings
Configuring Basic Wireless Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
SSID Name
cisco-xxxx
WMM
Enabled
WPS
Enabled
Hardware
Button
Configuring Basic Wireless Settings
Use the Basic Settings page to configure basic wireless settings.
To configure basic wireless settings:
Choose Wireless > Basic Settings.
In the Radio field, check Enable to turn the wireless radio on.
This field enables the wireless radio itself. By default there is only one wireless
network enabled, cisco-xxxx.
In the Wi-Fi Power field, select the Wi-Fi power on your network.
In the Wireless Network Mode field, choose one of these options from the
drop-down menu:
B/G/N-Mixed
Choose this option if you have Wireless-N, Wireless-B, and
Wireless-G devices in your network. This is the default setting
(recommended).
B-Only
Choose this option if you have only Wireless-B devices in your
network.
G-Only
Choose this option if you have only Wireless-G devices in
your network.
N-Only
Choose this option if you have only Wireless-N devices in your
network.
cisco-SSID2
cisco-SSID3
Enabled
Enabled
Disabled
Disabled
3
cisco-guest
Enabled
Disabled
53
Advertisement
Table of Contents
