Backing Up Your Current Configuration; Restoring Your Configuration From A Saved Configuration File; Upgrading Firmware - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Administering Your CVR100W
Upgrading Firmware
STEP 1
STEP 2
STEP 1
STEP 2
STEP 3
STEP 4
Upgrading Firmware
WARNING
Cisco CVR100W Wireless-N 300M Router Administration Guide
Backing Up Your Current Configuration
To back up your current system configuration:
Choose Administration > Backup/Restore Settings.
Click Backup Configuration.
Restoring Your Configuration from a Saved Configuration File
You can restore the system configuration from a previously-saved configuration
file:
Choose Administration > Backup/Restore Settings.
Click Browse to locate the configuration file.
Select the file and click Browse.
Click Restore Configuration.
The CVR100W uploads the configuration file and uses its settings to update the
system configuration. Then the CVR100W restarts and uses the new configuration.
You can upgrade the CVR100W to a newer firmware from the Administration >
Firmware Upgrade page.
During a firmware upgrade, do not try to go online, turn off the device, shut down
the PC, or interrupt the process in any way until the operation is complete. This
process takes about a minute, including the reboot process. Interrupting the
upgrade process at specific points when the flash memory is being written to may
corrupt it and render the router unusable.
7
100
Advertisement
Table of Contents
