Table of Contents
Advertisement
Chapter 3
Table or Wall Mount Instructions
Horizontal Placement
The HiPort+ can be placed on a level surface near an
electrical outlet .
Wall-Mounting Placement
The HiPort+ has two wall-mount slots on its bottom
panel . The distance between the slots is 123 mm
(2 .36 inches) .
Two screws are needed to mount the HiPort+ .
Suggested Mounting Hardware
4-5 mm
1-1 .5 mm
Note: Mounting hardware illustrations are not
†
true to scale .
NOTE:
Linksys is not responsible for damages
incurred
by
hardware .
HiPort+ User Guide
insecure
wall-mounting
Follow these instructions:
1 .
Determine where you want to mount the HiPort+ .
Make sure that the wall you use is smooth, flat, dry,
and sturdy . Also make sure the location is within reach
of an electrical outlet .
2 .
Drill two holes into the wall . Make sure the holes are
123 mm (4 .84 inches) apart .
3 .
Insert a screw into each hole and leave 3 mm
(0 .12 inches) of its head exposed .
4 .
Maneuver the HiPort+ so the wall-mount slots line up
with the two screws .
5 .
Place the wall-mount slots over the screws and slide
the HiPort+ down until the screws fit snugly into the
wall-mount slots .
123 mm
(4.84 inches)
Wall Mount Slots
Installation
6
Advertisement
Table of Contents
