Table of Contents
Advertisement
Chapter 4
Priority
Select High or Low in the Priority column . The
HiPort+'s four ports have been assigned low priority by
default .
Flow Control
If you want the HiPort+ to control the
transmission of data between network devices, select
Enabled . To disable this feature, select Disabled . Ethernet
Port Priority QoS does not require support from your ISP
because the prioritized ports LAN ports 1-4 are in your
network . This feature is enabled by default .
Application Priority
Application Priority QoS manages information as it is
transmitted and received . Depending on the settings of
the QoS screen, this feature will assign information a high
or low priority for the applications that you specify .
Optimize
Gaming
Applications
automatically allow common game application ports
to have a higher priority . These games include, but are
not limited to: Counter-Strike, Half-Life, Age of Empires,
EverQuest, Quake2/Quake3, and Diablo II . The default
setting is unselected .
Application Name
Enter the name you wish to give the
application in the Application Name field .
Priority
You can assign priority to the application from
the drop down menu . The options are Low, Medium,
High and Highest . The default is Low .
Specific Port #
Enter the port number for the
application .
Wireless QoS
WMM Support
Wi-Fi Multimedia (WMM), formerly
known as Wireless Multimedia Extensions (WME), is
a Wi-Fi Alliance certified feature, based on the IEEE
802 .11e standard . This feature provides QoS to wireless
networks . It is especially suitable for voice, music and
video applications; for example, Voice over IP (VoIP), video
streaming, and interactive gaming . If you have other
devices on your wireless network that support WMM,
keep the default, Enable .
No Acknowledgement
This feature prevents the HiPort+
from re-sending data if an error occurs . To use this feature,
select Enable . Otherwise keep the default setting,
Disable .
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes .
HiPort+ User Guide
Select
this
to
Administration > Management
When you click the Administration tab, you will see the
Management screen . This screen allows you to change
the HiPort+'s access settings and configure the UPnP
(Universal Plug and Play) features . You can also back up
and restore the HiPort+'s configuration file .
Management
Administration > Management
Router Password
Local Router Access
To ensure the HiPort+'s security, you will be asked for
your password when you access the HiPort+'s web-based
utility . The default password is admin .
Password and Re-enter to Confirm
that you change the default password to one of your
choice . Enter a new HiPort+ password and then enter it
again in the Re-enter to Confirm field .
Web Access
Access Server
HTTP (HyperText Transport Protocol) is
the communications protocol used to connect to servers
on the World Wide Web . HTTPS uses SSL (Secured Socket
Layer) to encrypt data transmitted for higher security .
Select HTTP or HTTPS .
Wireless Access Web
If you are using the HiPort+ in
a public domain where you are giving wireless access
to your guests, you can disable wireless access to the
HiPort+'s web-based utility . You will only be able to access
the web-based utility via a wired connection if you disable
the setting . Keep the default, Enable, to enable wireless
access to the HiPort+'s web-based utility, or select Disable
to disable wireless access to the utility .
Configuration
It is recommended
21
Advertisement
Table of Contents
