Configuring Static Dhcp - Cisco CVR100W Administration Manual
Wireless-n 300m router
Hide thumbs
Also See for CVR100W:
- Administration manual (150 pages) ,
- Quick start manual (9 pages) ,
- Quick start manual (9 pages)
Table of Contents
Advertisement
Configuring Network
Configuring LAN Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco CVR100W Wireless-N 300M Router Administration Guide
To edit the settings of a VLAN, select the VLAN and click Edit. To delete a selected
VLAN, click Delete. Click Save to apply your changes.
Configuring Static DHCP
You can configure the CVR100W to assign a specific IP address to a device with a
specific MAC address.
To configure static DHCP:
Choose Networking > LAN > Static DHCP.
From the VLAN drop-down menu, choose a VLAN number.
Click Add Row.
Enter the following information:
Description
IP Address
MAC Address
Enter a description of the client.
Enter the IP address of the device.
The IP Address assigned should be outside the pool of
the DHCP addresses configured. The DHCP pool is
treated as a generic pool and all reserved IPs should
be outside this pool.
Static DHCP assignment means the DHCP server
assigns the same IP to the defined MAC address every
time the device is connected to the network.
The DHCP server serves the reserved IP address
when the device using the corresponding MAC
address requests an IP address.
Enter the MAC address of the device.
The format for the MAC Address is
XX:XX:XX:XX:XX:XX where X is a number from 0 to 9
(inclusive) or an alphabetical letter between A and F
(inclusive).
2
32
Advertisement
Table of Contents
