Introduction
Verifying the Hardware Installation
Verifying the Hardware Installation
Connecting to Your Wireless Network
NOTE
Cisco CVR100W Wireless-N 300M Router Administration Guide
Configuration Next Steps
Although the Setup Wizard automatically configures the CVR100W, we
recommend that you change some default settings to provide better security and
performance.
In addition, you may need to manually configure some settings. A suggested
outline of steps follows:
•
If you already have a DHCP server on your network, and you do not want
the CVR100W to act as a DHCP server, see
•
Configure your Virtual Private Network (VPN) using Cisco QuickVPN. See
Using Cisco
QuickVPN.
To verify the hardware installation, complete the following tasks:
•
Check the light states. They are described in
CVR100W.
•
Connect a computer to an available LAN port and verify that you can
connect to a website on the Internet, such as www.cisco.com.
•
Configure a device to connect to your wireless network and verify the
wireless network is functional. See
To connect a device (such as a computer) to your wireless network, configure the
wireless connection on the device with the wireless security information you
configured for the CVR100W using the Setup Wizard.
If you want to connect a device to your wireless network to do the initial
configuration for the first time, use the default SSID name and pre-shared key are
provided on the product label at the bottom of the CVR100W.
The following steps are provided as an example; you may need to configure your
device differently. For instructions that are specific to your device, consult its
documentation.
Configuring LAN
Getting to know the
Connecting to Your Wireless
1
Settings.
Network.
21