Device Configuration Menu - Cisco 7975G Software Manual
Administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs
Also See for 7975G:
- Software manual (302 pages) ,
- Administration manual (217 pages) ,
- Troubleshooting and maintenance (25 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Table 4-3
IPv4 Configuration Menu Options (continued)
Option
Description
TFTP Server 2
Optional backup TFTP server that the phone uses if the
primary TFTP server is unavailable.
If neither the primary TFTP server nor the backup TFTP
server is listed in the CTL file on the phone, you must
unlock the CTL file before you can save changes to the
TFTP Server 2 option. In this case, the phone will delete the
CTL file when you save changes to the TFTP Server 2
option. A new CTL file will be downloaded from the new
TFTP Server 2 address.
For information about the CTL file, refer to Cisco Unified
Communications Manager Security Guide. For information
about unlocking the CTL file, see to the
Configuration Menu" section on page
BOOTP Server
Indicates whether the phone obtains its configuration from
a Bootstrap Protocol (BootP) server instead of from a DHCP
server.
Related Topics
•
•
•
•
•
Device Configuration Menu
The Device Configuration menu provides access to nine sub-menus from which you can view a variety
of settings that are specified in the configuration file for a phone. (The phone downloads the
configuration file from the TFTP server.) These sub-menus are:
•
•
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
Displaying a Configuration Menu, page 4-2
Unlocking and Locking Options, page 4-3
Editing Values, page 4-3
Overview of Options Configurable from a Phone, page 4-4
Device Configuration Menu, page 4-11
Unified CM Configuration Menu, page 4-12
SIP Configuration Menu (SIP Phones Only), page 4-13
To Change
1.
2.
3.
4.
"Security
4-31.
5.
Note
Display only—Cannot configure.
Device Configuration Menu
Unlock the CTL file, if necessary
(for example, if you are changing
the administrative domain of the
phone).
Unlock network configuration
options.
Enter an IP address for the TFTP
Server 1 option.
Scroll to the TFTP Server 2 option,
press the Edit softkey, and then
enter a new backup TFTP server IP
address.
Press the Validate softkey, and then
press the Save softkey.
If you forgot to unlock the CTL
file, you can change the TFTP
Server 2 address in the CTL file,
then erase the CTL file by
pressing the Erase softkey from
the Security Configuration
menu. A new CTL file will be
downloaded from the new TFTP
Server 2 address.
4-11
Advertisement
Table of Contents
Troubleshooting
