Cisco 7975G Software Manual page 60
Administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs
Also See for 7975G:
- Software manual (302 pages) ,
- Administration manual (217 pages) ,
- Troubleshooting and maintenance (25 pages)
Table of Contents
Advertisement
Installing the Cisco Unified IP Phone
Procedure
5.
Connect a straight-through Ethernet
cable from the switch to the
10/100/1000 SW port.
Connect a straight-through Ethernet
6.
cable from another network device,
such as a desktop computer, to the
10/100/1000 PC port.
Figure 3-1
Cisco Unified IP Phone 7975G Rear Cable Connections
2
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
3-6
Notes
Each Cisco Unified IP Phone ships with
one Ethernet cable in the box.
You can use either Category 3/5/5e/6
cabling for 10 Mbps connections, but
you must use Category 5/5e/6 for 100
Mbps connections and Category 5e/6 for
1000 Mbps connections.
Optional. You can connect another
network device later if you do not
connect one now.
You can use either Category 3/5/5e/6
cabling for 10 Mbps connections, but
you must use Category 5/5e/6 for 100
Mbps connections and Category 5e/6 for
1000 Mbps connections.
1
AUX
10/100/1000 SW 10/100/1000 PC
DC48V
3
5
4
Chapter 3
Reference
See the
"Network and Access Ports"
section on page 3-2
See the
"Network and Access Ports"
section on page 3-2
7
6
Setting Up the Cisco Unified IP Phone
for guidelines.
for guidelines.
OL-15790-01
Advertisement
Table of Contents
Troubleshooting
