Network Configuration - Cisco 7975G Software Manual
Administration guide for cisco unified communications manager 7.0 (sccp and sip)
Hide thumbs
Also See for 7975G:
- Software manual (302 pages) ,
- Administration manual (217 pages) ,
- Troubleshooting and maintenance (25 pages)
Table of Contents
Advertisement
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
Network Configuration
The Network Configuration menu displays device-specific network configuration settings on the phone
Table 4-18
Note
The phone also has a Network Configuration menu that you access directly from the Settings menu. For
information about the options on that menu, see the
Table 4-18
Network Configuration Menu Options
Option
Load Server
RTP Control Protocol
Cisco Unified IP Phone 7975G Administration Guide for Cisco Unified Communications Manager 7.0 (SCCP and SIP)
OL-15790-01
describes the options in this menu.
Description
Used to optimize installation time for phone
firmware upgrades and offload the WAN by
storing images locally, negating the need to
traverse the WAN link for each phone's upgrade.
You can set the Load Server to another TFTP
server IP address or name (other than the TFTP
Server 1 or TFTP Server 2) from which the
phone firmware can be retrieved for phone
upgrades. When the Load Server option is set,
the phone contacts the designated server for the
firmware upgrade.
The Load Server option allows you to
Note
specify an alternate TFTP server for
phone upgrades only. The phone
continues to use TFTP Server 1 or TFTP
Server 2 to obtain configuration files.
The Load Server option does not provide
management of the process and of the
files, such as file transfer, compression,
or deletion.
Indicates whether the phone supports the
Real-Time Control Protocol (RTCP). Settings
include:
Enabled
•
Disabled—default
•
If this feature is disabled, several call statistic
values display as 0. For additional information,
see the following sections:
Call Statistics Screen, page 7-13
•
Streaming Statistics, page 8-11
•
"Network Configuration Menu" section on page
To Change
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Device Configuration Menu
.
4-5.
4-27
Advertisement
Table of Contents
Troubleshooting
