Device Configuration Menu; Unified Cm Configuration Menu - Cisco 7975G Software Manual
Administration guide for cisco unified communications manager 9.0 (sccp and sip)
Hide thumbs
Also See for 7975G:
- Software manual (227 pages) ,
- Administration manual (217 pages) ,
- Troubleshooting and maintenance (25 pages)
Table of Contents
Advertisement
Cisco Unified IP Phone Settings
DHCPv6
Enabled
Related Topics
Display Settings Menu, on page 62
Unlock and Lock Options, on page 63
Value Input Guidelines, on page 63
Phone Setup Options, on page 64
Device Configuration Menu, on page 85
Device Configuration Menu
The Device Configuration menu provides access to nine submenus from which you can view a variety of
settings that are specified in the configuration file for a phone. The phone downloads the configuration file
from the TFTP server. These submenus are:
For instructions about how to access the Device Configuration menu and its submenus, see
Menu, on page
Unified CM Configuration Menu
The Unified CM Configuration menu contains the options Unified CM1, Unified CM2, Unified CM3, Unified
CM4, and Unified CM5. These options show the Cisco Unified Communications Manager servers that are
available to process from the phone, in prioritized order. To change these options, use Cisco Unified
Communications Manager Administration, Cisco Unified CM Group Configuration.
For an available Cisco Unified Communications Manager server, an option on the Unified CM Configuration
menu will show the Cisco Unified Communications Manager server IP address or name and one of the states
shown in the following table.
Auto IP configuration
Enabled
62.
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G Administration Guide for Cisco Unified
Device Configuration Menu
How the phone acquires its IP address and network
settings
When the M-bit is set on the router, the O-bit is ignored.
The phone can set the IPv6 address based on an IPv6
address that it received from a DHCPv6 server or the
phone can acquire the IPv6 address through stateless
address autoconfiguration.
When the M-bit is not set, you should set the O-bit on
the router. The phone will then acquire the IPv6 address
through stateless address autoconfiguration. The phone
will not request an IPv6 address from the DHCPv6
server, but it will request other network configuration
information.
Communications Manager 9.0 (SCCP and SIP)
Display Settings
85
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
