4-6-2. If the upper thread breakage codes (E-181, E-182) are displayed
E-181
1st needle thread breakage
Press reset switch
E-182
2nd needle thread breakage
Press reset switch
RESET
POWER
q
1. Press the RESET switch q. The machine will switch
to standby mode.
2. Thread the upper thread properly.
NOTE:
Sewing will continue until the end even if an
upper thread breakage has been detected
during sewing.
Obstructions to the thread may cause the 1st
needle thread breakage and 2nd needle
thread breakage messages to display even
when there is no actual thread breakage.
31
4. SEWING
BAS-705