Table of Contents
Advertisement
Problem
Belt loops are getting
caught on presser foot.
Belt loop folding position
is incorrect.
Bar tacking position is
incorrect.
Changed bar tacking
position for 1st bar
Changed bar tacking
position for 2nd bar tacking
Cause
Distance between belt
loops and presser foot is
too small.
Position of release
presser plate is incorrect.
Vertical sensor dog
height is too low.
Belt loops are not being
guided properly.
Fork is hitting belt loops
when belt loops are
being picked up.
Belt loop and fork height
is incorrect during belt
loop pick-up.
Cutter and loop pressers
are not aligned correctly.
Loop hold plate is tilted.
Belt loops are too curled.
Machine head presser
foot is touching belt loop.
Loop presser foot is at
an angle to belt loop.
Loop delivery position is
incorrect.
Drive cylinder arm
position is incorrect.
Fork bracket F position
is incorrect.
Check
Distance between belt
loops and presser foot
Distance between
loosen loop presser
plate and belt loops
Vertical sensor dog is
dropping too far.
Belt loop and loop guide
spring timing
Pick-up speed is too fast.
Belt loop and fork timing
during belt loop pick-up
Distance between loop
pressers and belt loops when
belt loops are being fed
Tilt of loop hold plate
Belt loops
Machine head presser
foot and belt loop
Loop presser foot and
belt loop
Loop position during
delivery
Sewing finish
Sewing finish
81
10. TROUBLESHOOTING
Remedy
Adjust the height of the
shock absorber underneath
the driving cylinder arm.
Adjust the height of the
loosen loop presser set
plate.
Adjust the height of the
sensor dog.
Adjust the loop guide
spring.
Adjust the valve.
Adjust the height of the
fork.
Adjust the width
adjustment plate.
Install correctly.
Replace with belt loops
which are not so curled.
Adjust the height of the belt
loops when they are placed.
Adjust the tilt of the loop
presser foot.
Check process from
folding to delivery.
Move the drive cylinder
arm back and forth to adjust.
Move fork bracket F to
adjust.
Page
65
49
65
53
63
58
52
61
65
58
53
65
49
BAS-705
- Quick Links:
- Part Names1
- Error Codes
Hide quick links:
Advertisement
Table of Contents
