Table of Contents
Advertisement
11. OPTIONS
11-3. Belt loop slackener ...... (S43632-001)
When setting the belt loop, the appropriate belt flexion can be maintained.
r
y
B
A
t
e
Attachment
1. Remove the two bolts, and then remove the loop guide q from the sewing machine.
2. Install the two posts e to the feeder base plate w.
3. Install the belt slack device r to the posts e with the two bolts t.
4. Connect the two air tubes.
5. Install the solenoid valve u with the two screws, and then connect the connector i.
6. Connect the air tubes y.
!2
Passing through the belt loops
7. Set the belt loops o into the belt slack device r, and then lower the guide lever !0 .
8. Pass the belt loops o through from the cylinder !1 to the channel guide !2 .
q
i
w
r
u
o
!0
84
y
!1
BAS-705
- Quick Links:
- Part Names1
- Error Codes
Hide quick links:
Advertisement
Table of Contents
