Table of Contents
Advertisement
11. OPTIONS
11. OPTIONS
11-1. Hand set switch unit ...... (S41639-001)
Use the hand set switch when you wish to sew in a cycle that is different from standard automatic sewing
(as far as operation of the belt loop guide).
w
q
Attachment
1. Attach the hand set switch q to the fold unit mounting plate w with the bolt e.
2. Open the control box and disconnect the connector r.
Use
1. Set DIP switch 17 to ON and then turn on the power. (Refer to page 68 for operation of the DIP switch.)
The belt loop guide will operate.
NOTE: Always be sure to return the DIP switch to RESET when turning off the power.
2. Put the cut off belt loop on loop presser foot B and loop presser foot F .
3. Press the hand set switch q.
The belt loop will be folded.
NOTE: At this time, if the hand set switch is pressed once more, the belt loop will be released.
4. Press the START switch.
After sewing, the belt loop guide will operate.
e
82
r
BAS-705
- Quick Links:
- Part Names1
- Error Codes
Hide quick links:
Advertisement
Table of Contents
