Suitability For Outdoor Installation - Cisco FM3200 Base Installation And Configuration Manual

Hide thumbs Also See for FM3200 Base:

Table of Contents

• The LEDs will blink.

• The unit will be restored to factory default settings

(including its default IP address of 192.168.0.10 and

subnet mask of 255.255.255.0).

• The unit will reboot.

• The administrator user name and password will both be

reset to admin.

4.1.6. Suitability for outdoor installation

The Cisco FM3200 Base was specifically designed for installation in harsh

outdoor environments. Under operating conditions, the unit is completely

sealed, and is capable of high-performance operation in outdoor

environments, and under severe conditions such as water spray, salt, and

extreme fluctuations in cold and heat.

The Cisco FM3200 Base has successfully passed stringent environmental

certification tests, including European Committee for Standardization

50155

(electronic equipment used on rolling stock for railway applications)

and

EN 45545

(fire protection on railway vehicles) tests.

Examples of specific certification tests included:

• Verification of resistance to salt water intrusion and corrosion. This

consisted of subjecting the unit to running, high-pressure salt water

for 24 hours, followed by a 24-hour drying time. The unit was then

carefully examined to verify that no corrosion or water ingress were

found.

• Verification of resistance to fluctuating temperatures. This consisted

of placing the unit in a climatic chamber and subjecting it to

operating ranges between -40°C and 80°C, for four hours.

Hardware installation

Page 29 of 176

Table of Contents