Cisco FM3200 Base Installation And Configuration Manual page 108

Hide thumbs Also See for FM3200 Base:

Table of Contents

To configure the radio unit as a DHCP or static-protocol wireless station

(STA), do the following steps:

1. Configure the radio unit as a wireless station by clicking the

WLAN MODE drop-down menu and selecting the STA option.

additional options (below):

2. To enable network address translation, check the Network

Address Translation check-box.

3. Choose the encryption protocol that will be used to encrypt

communication to and from connected clients by clicking the

WLAN Security drop-down, and choosing a suitable security

option.

4. The radio unit will broadcast the SSID shown in the WLAN SSID

field. If needed, change the SSID manually.

5. When maintenance personnel connect to the unit using the AP,

they will be prompted to enter a secret passphrase. Type a

chosen passphrase in the WLAN Passphrase entry field.

6. To show the WLAN passphrase in plain text as it is being entered,

check the Show Passphrase check-box.

Device configuration using the configurator interface

IMPORTANT

A different DHCP IP address class must be

assigned to every FM1200 Volo, Cisco 3200-

series and Cisco 4200-series radio in the

network. This will help avoid IP conflicts

between different access points.

• The CISCO 802.11 INTERFACE dialog will show

Page 108 of 176

Table of Contents