Cisco 8961 Administration Manual page 221
Unified communications manager 10.0 sip
Hide thumbs
Also See for 8961:
- Administration manual (292 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
Features, Templates, Services, and User Setup
If the Hunt Pilot Park Monitoring Forward No Retrieve Destination parameter value is blank, the call forwards
to the destination that is configured in the Directory Number Configuration window when the Park Monitoring
Forward No Retrieve Timer expires.
Actionable Incoming Call Alert Configuration
When this feature is enabled, an actionable alert displays when there is an incoming call. The alert will replace
the traditional incoming call pop-up notification, and the user must respond to the alert.
The Actionable Incoming Call Alert configuration parameter controls the behavior of this feature. There are
three possible settings for this new parameter:
Table 34: Actionable Incoming Call Alert Parameters
Parameter
Disabled
Show for all
Incoming Call
Show for Invisible
Incoming Call
If both the Custom Line Filters and the Actionable Incoming Call Alert features are enabled, actionable
Note
call alerts apply only to the lines that are covered by filters.
Enable Actionable Incoming Call Alert
Procedure
Step 1
Go to Cisco Unified Communications Manager Administration and choose one of the following:
• System > Enterprise Phone Configuration
• Device > Device Settings > Common Phone Profile
• Device > Phone
Step 2
Locate the Actionable Incoming Call Alert field and set the field to the appropriate setting.
The field is set to Disabled by default.
If you also configure this field in the other windows, the setting precedence is:
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
The default state of the feature.
The actionable incoming call alert is disabled. The traditional incoming call pop-up
alert displays.
The actionable incoming call alert displays for all calls regardless of visibility.
The actionable incoming call alert displays for calls not shown on the phone. This
parameter behaves similarly to the incoming call alert pop-up notification.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Actionable Incoming Call Alert Configuration
(SIP)
197
- Quick Links:
- Cisco Unified Ip Phone 8961, 9951,...
Hide quick links:
Advertisement
Chapters
Table of Contents
