VoIP Wireless Network
Cisco AP configuration
LEAP
WPA
LEAP
WPA2
EAP-FAST
802.1x
EAP-FAST with WPA
EAP-FAST with WPA2
WPA-PSK
WPA2-PSK
For additional information about Cisco WLAN Security, see
wireless/ps430/prod_brochure09186a00801f7d0b.html.
For more information about configuring authentication and encryption schemes on APs, see the Cisco Aironet
Configuration Guide for your model and release under the following URL:
http://www.cisco.com/cisco/web/psa/configure.html?mode=prod&level0=278875243
Related Topics
Cisco Unified Wireless AP Interactions, on page 90
Authentication Methods, on page 94
Encryption Methods, on page 95
Cisco Unified Communications Manager Interaction, on page 93
VoIP Wireless Network Components, on page 90
VoIP WLAN Deployment, on page 97
VoIP WLAN Deployment
This section provides configuration guidelines for deploying Cisco Unified IP Phones in the WLAN.
Supported Access Points
The wireless Cisco Unified IP Phone 9971 is supported on both the Cisco autonomous and unified solutions.
Minimum and recommended versions are:
REVIEW DRAFT - CISCO CONFIDENTIAL
WPA with optional
CCKM
WPA2
Optional CCKM
WPA
Optional CCKM
WPA2
WPA-PSK
WAP2-PSK
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
VoIP WLAN Deployment
Cisco Unified IP Phone
configuration
TKIP
LEAP or Auto (AKM)
AES
LEAP or Auto (AKM)
WEP
EAP-FAST
TKIP
EAP-FAST
AES
EAP-FAST
TKIP
Auto (AKM)
AES
Auto (AKM)
http://www.cisco.com/en/US/products/hw/
(SIP)
97