Ethernet Setup menu
Option
SW Port Setup
PC Port Setup
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
106
REVIEW DRAFT - CISCO CONFIDENTIAL
Description
Speed and duplex of the network
port. Valid values specify:
If the phone is connected to a switch,
configure the port on the switch to
the same speed/duplex as the phone,
or configure both to autonegotiate.
If you change the setting of this
option, you must change the PC Port
Configuration option to the same
setting.
Speed and duplex of the Computer
(access) port. Valid values:
If the phone is connected to a switch,
configure the port on the switch to
the same speed/duplex as the phone,
or configure both to autonegotiate.
If you change the setting of this
option, you must change the SW Port
Configuration option to the same
setting.
• Auto Negotiate
• 1000 Full:1000-BaseT/full
duplex
• 100 Half: 100-BaseT/half
duplex
• 100 Full: 100-BaseT/full duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
• Auto Negotiate
• 1000 Full: 1000-BaseT/full
duplex
• 100 Half: 100-BaseT/half
duplex
• 100 Full: 100-BaseT/full duplex
• 10 Half: 10-BaseT/half duplex
• 10 Full: 10-BaseT/full duplex
Cisco Unified IP Phone Settings
To change
See
Set SW Port Configuration
Field, on page
108.
See
Set PC Port Configuration
Field, on page
108.
To configure the setting on multiple
phones simultaneously, enable
Remote Port Configuration in the
Enterprise Phone Configuration
window(System > Enterprise
Phone Configuration).
If the ports are configured
Note
for Remote Port
Configuration in Cisco
Unified Communications
Manager Administration,
the data cannot be changed
on the phone.