Remote Port Configuration Setup - Cisco 8961 Administration Manual
Unified communications manager 10.0 sip
Hide thumbs
Also See for 8961:
- Administration manual (292 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
Remote Port Configuration Setup
the hierarchy, and the files are then rapidly transferred down the transfer hierarchy to the other phones on the
subnet that are using TCP connections.
This menu option indicates whether the phone supports peer firmware sharing. Settings include:
• Enabled, which is the default value.
• Disabled
Phone firmware release 9.1(1) supports HTTP and TFTP firmware download methods.
Note
To set up Peer Firmware Sharing, follow these steps:
Procedure
Step 1
In Cisco Unified Communications Manager Administration, choose Device > Phone.
Step 2
Find your phone from the list of phones that associate with the Cisco Unified Communications Manager.
Step 3
Click on the Device Name of the phone.
The Phone Configuration window appears.
Step 4
Go to Product Specific Configuration Layout area and select Enable from the Peer Firmware Sharing drop-down
list.
The Peer Firmware Sharing is enabled by default.
Step 5
Check the Override Common Settings check box for any setting in the Product Specific Configuration area
that you wish to update.
• If you do not check this check box, the corresponding parameter setting does not take effect.
• Parameters that you set in the Product Specific Configuration area may also appear in the Phone
If you set these same parameters in these other windows too, the setting that takes precedence is determined
in the following order:
1 Device Configuration window settings (highest precedence)
2 Common Phone Profile window settings
3 Enterprise Phone Configuration window settings (lowest precedence)
Remote Port Configuration Setup
To configure the Switch Remote Port Configuration parameter or the PC Remote Port Configuration parameter,
you have two options in the Cisco Unified Communications Manager Administration application:
• To configure the parameter for individual phones, choose Device > Phone, select the appropriate IP
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager
10.0 (SIP)
188
REVIEW DRAFT - CISCO CONFIDENTIAL
Configuration window for various devices and in the Enterprise Phone Configuration window.
Phones, and scroll to the Product Specific Configuration Layout area (Switch Port Remote Configuration
or PC Port Remote Configuration).
Features, Templates, Services, and User Setup
- Quick Links:
- Cisco Unified Ip Phone 8961, 9951,...
Hide quick links:
Advertisement
Chapters
Table of Contents
