hit counter script

Cisco 8961 Administration Manual page 269

Unified communications manager 10.0 sip
Hide thumbs Also See for 8961:
Table of Contents

Advertisement

Model information, status, and statistics
REVIEW DRAFT - CISCO CONFIDENTIAL
Procedure
Step 1
Press Applications
Step 2
Select Administrator Settings.
Step 3
Select Status.
Step 4
Select Current Access Point.
Step 5
To exit the Current Access Point screen, press Exit.
Current Access Point
The following table describes the fields in the Current Access Point screen.
Table 50: Current Access Point items on the Cisco Unified IP Phone 9971
Item
AP Name
MAC Address
Frequency
Last RSSI
Beacon Interval
Capability
Basic Rates
Optional Rates
Current Channel
dtime Period
Country Code
Channels
.
Description
Name of the AP, if it is CCX-compliant; otherwise, the MAC address displays here.
MAC address of the AP.
The latest frequency where this AP was observed.
The latest RSSI in which this AP was observed.
Number of time units between beacons. A time unit is 1.024 ms.
This field contains a number of subfields that are used to indicate requested or
advertised optional capabilities.
Data rates that the AP requires and the AP at which the station must be capable of
operating.
Data rates that the AP supports and the AP that are optional for the station to operate
at.
The latest channel where this AP was observed.
Every nth beacon is a dtime period. After each DTIM beacon, the AP sends any
broadcast or multicast packets that are queued for power-save devices.
A two-digit country code. Country information might not be display if the country
information element (IE) is not present in the beacon.
A list of supported channels (from the country IE).
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
Display Current Access Point Screen
(SIP)
245

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

99519971

Table of Contents