hit counter script

Cisco 8961 Administration Manual page 231

Unified communications manager 10.0 sip
Hide thumbs Also See for 8961:
Table of Contents

Advertisement

Features, Templates, Services, and User Setup
REVIEW DRAFT - CISCO CONFIDENTIAL
Table 37: Cisco VXC VPN operation as determined by VXC VPN Option and Challenge settings
VXC VPN Option setting
Dual Tunnel (default)
Dual Tunnel (default)
Single Tunnel
Single Tunnel
The following table describes how a change in the VXC VPN Option setting alters the operation of the VXC
VPN feature when the feature is already enabled.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 10.0
VXC Challenge setting
Challenge (default)
No Challenge
Challenge
No Challenge
Cisco VXC VPN Setup
Result after enabling the VXC VPN
feature (with Cisco VXC connected
to the phone)
The phone displays the VXC VPN
Sign In window to prompt the user
to enter a password. If one-time
password is configured on the VPN
concentrator (that is, a new
password is always required to
reauthenticate the tunnel), the user
must enter a password for the Cisco
VXC VPN that differs from the
password that was used for the
phone VPN tunnel.
The phone attempts to reuse the
phone VPN credentials for the
Cisco VXC VPN tunnel. Note that
if the VPN concentrator is
configured for one-time passwords,
the attempt fails, and the phone
displays the VXC VPN Sign In
window for the user to enter a
different password from the phone
VPN password.
The phone disconnects the phone
VPN tunnel, and then displays the
Phone VPN Sign In window to
prompt the user to enter a password
and reestablish the phone VPN
tunnel. If the user is on an active
call, the phone waits until the call
ends before tearing down the
tunnel.
Cisco VXC traffic receives silent
permission to go over the phone
VPN with no challenge.
(SIP)
207

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

99519971

Table of Contents