Ip Verify Source Dhcp-Snooping-Vlan - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

ip verify source dhcp-snooping-vlan

To enable IP Source Guard on a Layer 2 Ethernet interface, use the ip verify source dhcp-snooping-vlan

command. To disable IP Source Guard on an interface, use the no form of this command.

ip verify source dhcp-snooping-vlan

no ip verify source dhcp-snooping-vlan

Syntax Description

This command has no arguments or keywords.

Command Default

Command Modes

Interface configuration

Command History

Usage Guidelines

By default, IP Source Guard is not enabled on any interface.

This command does not require a license.

This example shows how to enable IP Source Guard on an interface:

switch# configure terminal

switch(config)# interface ethernet 2/1

switch(config-if)# ip verify source dhcp-snooping-vlan

switch(config-if)#

Related Commands

ip source binding

show ip verify source

Modification

This command was introduced.

Creates a static IP source entry for the specified

Ethernet interface.

Displays IP-to-MAC address bindings.

Cisco Nexus 7000 Series Security Command Reference

ip verify source dhcp-snooping-vlan