Radius-Server Test - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

radius-server test

To monitor the availability of all RADIUS servers without having to configure the test parameters for each

server individually, use the radius-server test command. To disable this configuration, use the no form of

this command.

radius-server test {idle-time time| password password| username name}

no radius-server test {idle-time time| password password| username name}

Syntax Description

idle-timetime

passwordpassword

usernamename

Command Default

Server monitoring: DisabledIdle time: 0 minutesTest username: test Test password: test

Command Modes

Global configuration

Command History

Usage Guidelines

To use this command, you must enable RADIUS authentication.

Any servers for which test parameters are not configured are monitored using the global level parameters.

Test parameters that are configured for individual servers take precedence over global test parameters.

Cisco Nexus 7000 Series Security Command Reference

Configures parameters to send test packets to the

RADIUS server.

Specifies the time interval (in minutes) for monitoring

the server. The range is from 1 to 1440 minutes.

When the idle time interval is 0 minutes,

periodic RADIUS server monitoring is not

Specifies a user password in the test packets. The

password is alphanumeric, case sensitive, and has a

maximum of 32 characters.

Specifies a username in the test packets. The name

is alphanumeric, not case sensitive, and has a

maximum of 32 characters.

To protect network security, we recommend

that you use a username that is not the same

as an existing username in the RADIUS

Modification

This command was introduced.