Show Ip Dhcp Relay Address - Cisco Nexus 7000 Series Command Reference Manual
Hide thumbs
Also See for Nexus 7000 Series:
- Reference manual (746 pages) ,
- Configuration manual (536 pages) ,
- Hardware installation and reference manual (508 pages)
Table of Contents
Advertisement
Show Commands
show ip dhcp relay address
To display DHCP server addresses configured on the device, use the show ip dhcp relay address command.
show ip dhcp relay address [interface {ethernet list| port-channel list}]
show ip dhcp relay address [interface interface-list]
Syntax Description
interface
ethernet
list
port-channel
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(2)
4.2(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display all the DHCP relay addresses configured on a device:
switch# show ip dhcp relay address
Interface
-------------
Ethernet1/2
Modification
Support was added for the interface keyword and for VRF awareness.
This command was introduced.
Relay Address
VRF Name
-------------
--------
10.1.1.1
(Optional) Restricts the output to a DHCP addresses
configured on range or set of Ethernet or port-channel
interfaces and subinterfaces.
(Optional) Restricts the output to a DHCP addresses
configured on range or set of Ethernet interfaces and
subinterfaces.
Single interface, range of interfaces, or
comma-separated interfaces and ranges (see the
"Examples" section).
(Optional) Restricts the output to a DHCP addresses
configured on range or set of port-channel interfaces
and subinterfaces.
Cisco Nexus 7000 Series Security Command Reference
show ip dhcp relay address
795
Advertisement
Table of Contents
