Telnet6 - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

telnet6

To create a Telnet session using IPv6 on the Cisco NX-OS device, use the telnet6 command.

telnet6 {ipv6-address| hostname} [ port-number ] [vrf vrf-name]

Syntax Description

ipv6-address

Command Default

Command Modes

Any command mode

Command History

Usage Guidelines

To use this command, you must enable the Telnet server using the feature telnet command.

To create a Telnet session with IPv4 addressing, use the telnet command.

The Cisco NX-OS software supports a maximum of 60 concurrent SSH and Telnet sessions.

This command does not require a license.

This example shows how to start a Telnet session using an IPv6 address:

switch# telnet6 2001:0DB8:0:0:E000::F vrf management

Cisco Nexus 7000 Series Security Command Reference

IPv6 address of the remote device.

Hostname of the remote device. The name is

alphanumeric, case sensitive, and has a maximum of

64 characters.

(Optional) Port number for the Telnet session. The

range is from 1 to 65535.

(Optional) Specifies the virtual routing and

forwarding (VRF) name to use for the Telnet session.

The name is case sensitive.

Modification

This command was introduced.