Dot1X Initialize - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

dot1x initialize

To initialize 802.1X authentication for supplicants, use the dot1x initialize command.

dot1x initialize [ interface ethernet slot | port]

Syntax Description

interface ethernet slot / port

Command Default

Command Modes

Any command mode

Command History

Usage Guidelines

You must use the feature dot1x command before you configure 802.1X.

This command does not require a license.

This example shows how to initialize 802.1X authentication for supplicants on the Cisco NX-OS device:

switch# dot1x initialize

This example shows how to initialize 802.1X authentication for supplicants on an interface:

switch# dot1x initialize interface ethernet 2/1

Related Commands

feature dot1x

show dot1x all

(Optional) Specifies the interface for 802.1X

authentication initialization.

Modification

This command was introduced.

Enables the 802.1X feature.

Displays all 802.1X information.

Cisco Nexus 7000 Series Security Command Reference

dot1x initialize