Clear Dot1X - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

clear dot1x

To clear 802.1X authenticator instances, use the clear dot1x command.

cleardot1x{all| interface | slot/port}

Syntax Description

interface ethernet slot/port

Command Default

Command Modes

Any command mode

Command History

Usage Guidelines

You must use the feature dot1x command before you configure 802.1X.

This command does not require a license.

This example shows how to clear all 802.1X authenticator instances:

switch# clear dot1x all

This example shows how to clear the 802.1X authenticator instances for an interface:

switch# clear dot1x interface ethernet 1/1

Related Commands

feature dot1x

show dot1x all

Cisco Nexus 7000 Series Security Command Reference

Specifies all 802.1X authenticator instances.

Specifies the 802.1X authenticator instances for a

specified interface.

Modification

This command was introduced.

Enables the 802.1X feature.

Displays all 802.1X information.