Key-Server-Priority - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

key-server-priority

To configure the preference for a device to serve as the key server for MACsec Key Agreement (MKA)

encryption, use the key-server-priority command. To reset the default preference, use the no form of this

key-server-priority value

no key-server-priority value

Syntax Description

Command Default

Command Modes

MACsec policy configuration (config-macsec-policy)

Command History

Usage Guidelines

To use this command, enable the MKA feature.

This example shows how to set the key server priority:

switch# configure terminal

switch(config)# macsec policy p1

switch(config-macsec-policy)# key-server-priority 9

Related Commands

key chain keychain-name

macsec keychain policy

Cisco Nexus 7000 Series Security Command Reference

Priority for a device to become the key server. The

lower the value, the higher the preference. The range

is from 0 to 255.

Modification

This command was introduced.

Enables the MKA feature.

Creates a key or enters the configuration mode of an

existing key.

Creates a keychain or enters the configuration mode

of an existing keychain.

Configures the MACsec keychain policy.