Device - Cisco Nexus 7000 Series Command Reference Manual
Hide thumbs
Also See for Nexus 7000 Series:
- Reference manual (746 pages) ,
- Configuration manual (536 pages) ,
- Hardware installation and reference manual (508 pages)
Table of Contents
Advertisement
device
device
To add a supplicant device to the Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP)
identity profile exception list, use the device command. To remove a supplicant device, use the no form of
this command.
device {authenticate| not-authenticate} {ip-address ipv4-address [ subnet-mask ]| mac-address mac-address
[ mac-address-mask ]} policy policy-name
no device {authenticate| not-authenticate} {ip-address ipv4-address [ subnet-mask ]| mac-address
mac-address [ mac-address-mask ]} policy policy-name
Syntax Description
authenticate
not-authenticate
ip-address ipv4-address
subnet-mask
mac-address mac-address
mac-address-mask
policy policy-name
Command Default
None
Command Modes
Identity policy configuration
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Cisco Nexus 7000 Series Security Command Reference
270
Specifies to allow authentication of the device using
the policy.
Specifies to not allow authentication of the device
using the policy.
Specifies the IPv4 address for the supplicant device
in the A.B.C.D format.
(Optional) IPv4 subnet mask for the IPv4 address.
Specifies the MAC address for the supplicant device
in the XXXX.XXXX.XXXX format.
(Optional) Mask for the MAC address.
Specifies the policy to use for the supplicant device.
Modification
This command was introduced.
D Commands
Advertisement
Table of Contents
