Trust List Screen - Cisco 7962G Administration Manual
For cisco unified communications manager 6.0
Hide thumbs
Also See for 7962G:
- Administration manual (235 pages) ,
- User manual (110 pages) ,
- Specifications (5 pages)
Table of Contents
Advertisement
Security Configuration Menu
Unlocking the CTL File
To unlock the CTL file from the Security Configuration screen, follow these steps:
Procedure
Step 1
Press **# to unlock options on the Security Configuration menu.
If you decide not to continue, press **# again to lock options on this menu.
Note
Highlight the CTL File option.
Step 2
Press the Unlock softkey to unlock the CTL file.
Step 3
After you change and save the TFTP Server 1 or the TFTP Server 2 option, the CTL file will be locked
automatically.
Note
Trust List Screen
The Trust List menu displays information about all of the servers that the phone trusts and includes the
options described in
If a CTL file is installed on the phone, you can access the Trust List menu by pressing the Settings button
and choosing Security Configuration > Trust List.
To exit the Trust List menu, press the Exit softkey.
Table 4-17
Trust List Menu Settings
Option
Description
CAPF Server
IP address of the CAPF used by the
phone. Also displays a certificate icon
server.
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 6.0
4-32
If a password is configured on the phone, you must enter a password after pressing **#.
When you press the Unlock softkey, it changes to Lock. If you decide not to change the TFTP
Server 1 or TFTP Server 2 option, press the Lock softkey to lock the CTL file.
Table
4-17.
if a certificate is installed for this
Chapter 4
Configuring Settings on the Cisco Unified IP Phone
To Change
For more information about this file, refer
to the "Configuring the Cisco CTL
Client" section in Cisco Unified
Communications Manager Security
Guide.
OL-12641-01
Advertisement
Table of Contents
Troubleshooting
