Ipv4 Setup Menu Options - Cisco 8961 Administration Manual
Administration guide for cisco unified communications manager 8.6 (sip)
Hide thumbs
Also See for 8961:
- Administration manual (378 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
IPv4 Setup Menu Options
IPv4 Setup Menu Options
The IPv4 Setup menu is a submenu of the Ethernet Setup menu and of the WLAN Setup menu. To reach
the IPv4 menu, select the IPv4 option on the Ethernet Setup menu or on the WLAN Setup menu.
Table 7-3
For information about the keys you can use to edit options, see the
Table 7-3
IPv4 Setup Menu Options
Option
DHCP Enabled
IP Address
Subnet Mask
Default Router
DNS Server 1
DNS Server 2
DNS Server 3
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
7-10
describes the IPv4 Setup menu options.
Description
Indicates whether the phone has DHCP enabled or
disabled.
When DHCP is enabled, the DHCP server assigns the
phone an IP address. When DHCP is disabled, the
administrator must manually assign an IP address to the
phone.
Internet Protocol (IP) address of the phone.
If you assign an IP address with this option, you must also
assign a subnet mask and default router. See the Subnet
Mask and Default Router options in this table.
Subnet mask used by the phone.
Default router used by the phone.
Primary Domain Name System (DNS) server (DNS Server
1) and optional backup DNS servers (DNS Server 2–3)
used by the phone.
Chapter 7
Configuring Settings on the Cisco Unified IP Phone
"Editing Values" section on page
To Change
Scroll to the DHCP Enabled option
and press the No softkey to disable
DHCP, or press the Yes softkey to
enable DHCP.
Set the DHCP Enabled option to
1.
No.
Scroll to the IP Address option,
2.
press the Select softkey, and then
enter a new IP Address.
Press the Apply softkey
3.
Set the DHCP Enabled option to
1.
No.
Scroll to the Subnet Mask
2.
option, press the Select softkey,
and then enter a new subnet
mask.
Press the Apply softkey.
3.
Set the DHCP Enabled option to
1.
No.
Scroll to the appropriate Default
2.
Router option, press the Select
softkey, and then enter a new
router IP address.
Press the Apply softkey.
3.
Set the DHCP Enabled option to
1.
No.
Scroll to the appropriate DNS
2.
Server option, press the Select
softkey, and then enter a new
DNS server IP address.
Press the Apply softkey.
3.
Repeat Steps 2 and 3 as needed
4.
to assign backup DNS servers.
7-3.
- Quick Links:
- Unlocking and Locking Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
