Cisco 8961 Administration Manual page 247
Administration guide for cisco unified communications manager 8.6 (sip)
Hide thumbs
Also See for 8961:
- Administration manual (378 pages) ,
- User manual (180 pages) ,
- Features (35 pages)
Table of Contents
Advertisement
Appendix D
Basic Phone Administration Steps
In the Extension Information pane of this window, check the Enable Extension Mobility box if this
c.
phone supports Cisco Extension Mobility.
Click Save.
d.
Configure line settings:
Step 2
On the Phone Configuration window, click Line 1 on the left pane of the window. The Directory
a.
Number Configuration window appears.
In the Directory Number field, enter a valid number that can be dialed.
b.
Example: 26640 is the directory number of user John Doe in the preceding example.
From the Route Partition drop-down list, choose the partition to which the directory number
c.
belongs. If you do not want to restrict access to the directory number, choose <None> for the
partition.
From the Calling Search Space drop-down list (Directory Number Settings pane of the Directory
d.
Number Configuration window), choose the appropriate calling search space. A calling search space
comprises a collection of partitions that are searched for numbers that are called from this directory
number. The value that you choose applies to all devices that are using this directory number.
In the Call Pickup and Call Forward Settings pane of the Directory Number Configuration window,
e.
choose the items (i.e. Forward All, Forward Busy Internal) and corresponding destinations to which
calls should be sent.
Example: If you want incoming internal and external calls that receive a busy signal to be forwarded
to the voice mail for this line, check the Voice Mail box next to the "Forward Busy Internal" and
"Forward Busy External" items in the left column of the Call Pickup and Call Forward Settings
pane.
In the "Line 1 on Device..." pane of the Directory Number Configuration window, configure the
f.
following:
–
–
Click Save.
g.
Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.6 (SIP)
This field should contain the same number that appears in the Telephone Number field
Note
on the User Configuration window.
Display (Internal Caller ID field)—You can enter the first name and last name of the user of this
device so that this name displays for all internal calls. You can also leave this field blank to have
the system display the phone extension.
External Phone Number Mask—Indicate phone number (or mask) that is used to send Caller ID
information when a call is placed from this line.
You can enter a maximum of 24 number and "X" characters. The Xs represent the directory
number and must appear at the end of the pattern.
Example: Using the john doe extension in the preceding example, if you specify a mask of
408902XXXX, an external call from extension 6640 displays a caller ID number of
4089026640.
This setting applies only to the current device unless you check the check box at right
Note
(Update Shared Device Settings) and click the Propagate Selected button. (The check
box at right displays only if other devices share this directory number.)
Configuring the Phone
D-5
- Quick Links:
- Unlocking and Locking Options
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
