Ipv4 Setup Menu Options - Cisco 6921 Administration Manual
Administration guide for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs
Also See for 6921:
- Administration manual (186 pages) ,
- User manual (124 pages) ,
- Features (29 pages)
Table of Contents
Advertisement
IPv4 Setup Menu Options
Table 4-1
Network Setup Menu Options (continued)
Option
PC Port Setup
LLDP-MED: Switch Port Enables and disables Link Layer Discovery Protocol
IPv4 Setup Menu Options
The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select
the IPv4 option on the Network Setup menu.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
4-6
Description
Speed and duplex of the access port. Valid values:
Auto Negotiate
•
1000 Full—1000-BaseT/full duplex (Supported only
•
for Cisco Unified IP Phone 6945.)
100 Half—100-BaseT/half duplex
•
100 Full—100-BaseT/full duplex
•
10 Half—10-BaseT/half duplex
•
10 Full—10-BaseT/full duplex
•
If the phone is connected to a switch, configure the port
on the switch to the same speed/duplex as the phone, or
configure both to auto-negotiate.
If you change the setting of this option, you must change
the SW Port Configuration option to the same setting.
Media Endpoint Discovery (LLDP-MED) on the switch
port. Use this setting to force the phone to use a specific
discovery protocol, which should match the protocol
supported by the switch. Settings include:
•
Enabled—default
•
Disabled
To Change
Unlock network setup options.
1.
Scroll to the PC Port Setup
2.
option and then press the Edit
softkey.
Scroll to the setting that you
3.
want and then press the Select
button.
To configure the setting on multiple
phones simultaneously, enable the
PC Port Remote Configuration in the
Enterprise Phone Configuration
(System > Enterprise Phone
Configuration).
Note
If the ports are configured for
PC Port Remote
Configuration in Unified
CM, the data cannot be
changed on the phone.
From Cisco Unified CM
Administration, choose
Device > Phone > Phone
Configuration.
Chapter
OL-24567-01
- Quick Links:
- Configuring Telephony Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
